Pro2 Twin Rear Silencer

Go to Hurric brand shop

Exhaust systems

The high-performance aftermarket silencer generation from Hurric is characterised by its throaty sound, high-quality engineering and excellent price-performance ratio. Thanks to countless recommendations in independent trade magazines, these rear silencers have established themselves as a sure-fire winner on the accessories market. All rear silencers are supplied with EC type approval and removable dB absorber.

Various types of modern vehicle accessories now often carry an "E" mark that is valid throughout Europe. The "E" mark, a combination of numbers and letters, is clearly visible on the product and provides information about the tested area of application, the country in which the test was carried out, and, if applicable, the vehicle type for which the approval applies. EC type approvals for exhaust systems, for example, are always vehicle type-specific, while those for lighting equipment apply to entire groups of vehicles, such as motorbikes.
The legislator has designated this test mark as the sole proof of legality, i.e., a written report is not required, nor is registration necessary. In addition, however, the applicable guidelines of the StvZO (German Road Traffic Licensing Regulations) must always be observed during installation.
During a traffic check or at the general inspection appointment, the vehicle owner has fulfilled their obligation to provide proof by presenting the test mark. The inspecting officer is then free to check the test mark via the KBA in Flensburg, where all test marks can be decoded.

Stainless steel is a collective term for rustproof steel. It is much more resistant to corrosion than non-alloyed steels. Stainless steel does not deteriorate, and is hygienic, UV-resistant, non-corroding, fracture-proof, non-toxic and environmentally friendly. It does not weather and can be recycled in its entirety, even after many years. Technically, the term "stainless steel" refers to corrosion-resistant steel alloys with a wide variety of compositions but always containing a high percentage of chromium (usually a minimum of 10.5%)

.

MAINTENANCE:
Stainless steel should be cleaned regularly like all other materials, especially after exposure to salty air (near the coast), and also at regular intervals.
Water can easily collect in corners, edges and screw connections, resulting in corrosion. So careful cleaning is important, and if necessary screws should be undone in order to clean the parts thoroughly.
Do not leave rusty steel parts against stainless steel to avoid the rust "contamination".

Made in Italy