X-Bar Cross Bar Cx00 Width 805Mm

LSL Cross Bar Handlebar with real carbon sheathing

This X-Bar handlebar in crossbar style is made of aluminium and hand-finished with real carbon sheathing plus clear lacquer. This gives the handlebar considerably greater rigidity and makes it a real eye-catcher on any motorbike!

Not only for dirt bikes, but for street and muscle bikes too. This handlebar counteracts annoying bounce of the handlebar tube, and gives significantly larger reserves in extreme situations.

Made from high-quality aluminium (2014 T6 - extremely sturdy). This handlebar tapers conically (diameter: 28.6mm) from the clamping area to the ends, which means that flexural strength is virtually doubled, minimising deformation. The diameter at the outer edges is 22 mm.

Handlebar dimensions: W:805, H: 75, D: 90

Includes type approval valid for Germany for the models listed in the certificate.

The handlebar can, of course, be mounted on other models, if compatible. In this case, individual component or modification approval from a test centre (e.g. TÜV, Dekra) and entry in the vehicle papers will be required. Suitable handlebar clamps should then be ordered separately, if required (see "Compatible products").

Note: Aftermarket handlebars are supplied without a hole for securing the switch unit. Positioning varies depending on the bike model. Drilling into the handlebar for securing purposes is permitted: First, ensure that your new handlebar is optimally aligned with the bike. Try out the positioning of the switch units, making sure that they do not hit the tank at full lock. Mark the securing hole and drill the handlebar to the right diameter. To make sure that the drill doesn't slip on the smooth handlebar tube, or if you are prone to mistakes when centre punching or somehow not drilling straight, you should use the LSL drilling jig, Order no. 10005264 (see "Compatible products"). This is the sure way to avoid such mistakes.