- Home
- Add-On Parts
- Handlebars/Grips/Levers
- Handlebar Accessories
- clamp kit Ø22.2 mm
LSL
CLAMP KIT Ø22,2
78MM SILVER
Art. No. 10062086
Important notes
RRP
€89.95 2
€69.95 1
You have placed the following items in the shopping basket:
Description
CLAMP KIT Ø22,2 78MM SILVER
Handlebar replacement is always a good opportunity to replace the original clamping blocks with more attractive designs, such as the LSL universal clamping blocks for handlebar Ø22.2 mm. Here we have the corresponding LSL clamp kit. The included brackets can be screwed into the original fixing points of the upper triple clamps with centrally located M10 x 1.25 mm screws. On models with rubber mounts, these remain in place. The LSL universal clamps are CNC-machined from high-quality aluminium.
- Material: Aluminium
- Material treatment: CNC-milled, anodised
- Mounting: central bolting to the standard M10 x 1.25 mm mounting points
- Clamp KM3: 35 mm high
- Dimensions: 7/8 inch clamping, for Ø 22.2mm handlebars
- Silver or black
Please check whether your vehicle is listed in the ABE and determine the required screw length.
Attention:
This article is only registration-free if your motorbike is assigned to the KM3 clamp in the enclosed ABE and in compliance with all conditions.
For vehicles that are not listed in the model list, approval is possible by acceptance in accordance with § 19(2) StVZO.
This is how you determine the bolt length:
Measure the length of the original screws that protrude from the original clamping blocks, so the usable screw length.
Scope of delivery:
2 x clamping blocks (KM3)
4 x screws M8x25
2 x screws M10x1,25, in the chosen length
2 x washers M10
2 x nuts M10x1,25 (self-locking)
An ABE and/or parts certificate is available for this item. Please check whether your vehicle is registered in the ABE or in the parts certificate and whether additional mounting parts (e.g. clamps) are required (see documents). For some models, a preliminary manufacturer's confirmation is available.
Manufacturer details: LSL
Design and function at the highest level
Anybody who looks at the LSL conversion projects can see straight away that the people work with a great deal of passion and at least equally as much technical expertise. It is true that LSL places enormous value on creating a great look for all of its products, but maximum biking pleasure through excellent performance is always central to every product development. LSL has made an extremely good name for itself in the field of ergonomic optimization (handlebars, grips, levers and footrests). LSL also specialises in chassis- and hydraulic components, crash protection and lighting. Several accolades testify to the fact that LSL has taken the right approach with its commitment to technical finesse and quality without compromise - such as the fact LSL has won the 2013 "PS" magazine readers choice award in the "accessories/conversions" category for the fifth consecutive time.
Info
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
Info
The German "Allgemeine Betriebserlaubnis (ABE)" (general type approval) authorises the use of the relevant accessories on the vehicle models listed in the certificate booklet. The certificate booklet must be carried along when driving and must be presented on request in the event of a traffic control or the main inspection (HU).
Accessories with an ABE do not have to be registered in the vehicle documents. However, if you do not want to carry the certificate with you at all times, you can have it registered (at a charge) by the TÜV, for example.
If the accessories are to be used on a vehicle that is not listed in the ABE, an individual approval is necessary.
The regulations in other countries may differ. Before ordering a product, please make sure that it may be used in road traffic in your region, your country.
Documents
Reviews
Write a review for CLAMP KIT Ø22,2
Terms of use
We offer you the opportunity to rate products purchased from Louis and to share your experiences with them publicly.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Many thanks!
Your product rating has been saved. It will be displayed in a few minutes
Your previous input will be lost!
Do you really want to cancel your entry?
All versions
Any questions?
+400 brands
2-year right of return
Fast delivery
Worldwide shipping